ArchivedWebinars

Archived Webinars

Unable to join us live? No problem! We archive all of our webinars so you may view them at your own convenience. To view our webinars please click the view archive link on each webinar. If you have any questions or you need to contact us about a webinar archive or doing a private webinar please send us an email at info@arisafety.com. Our archive library is below.

Leakage Testing 101

  • Testing requirements
  • What does leakage current testing measure?
  • The importance of leakage current testing
  • How is leakage current testing different from other safety tests?

September 13th, 2017
Time: 61 Minutes

Audit Survival Guide (Including Safe Workstation)

  • Functionality and Calibration
  • Test Procedures
  • Test Data and Results
  • Operator Safety and Training
  • Stations with and without positive protection
  • Ramp up your workstation protection to guard against electrical shock

July 12th, 2017
Time: 54 Minutes

Testing your Grounding Circuit: Bonding Vs. Continuity Testing

  • Ground of electrical products
  • Class I vs Class II products
  • Ground Continuity Test
  • Ground Bond Test
  • What is tested during each test

June 14th, 2017
Time: 53 Minutes

The Hipot Test

  • Understanding the hipot test
  • AC vs DC test and 500VA
  • Test parameters and failures types
  • Additional features – Ground Continuity, Arc Detection and SmartGF
  • Avoiding false Failure – Charge Lo and Ramp Hi

May 17th, 2017
Time: 62 Minutes

How Does It Work? A Look at Circuit Theory

  • Review of electrical safety tests
  • Circuits for electrical safety tests
  • What is tested during each test
  • Arc Detection and Smart GFI

April 12th, 2017
Time: 62 Minutes

Electrical Safety Testing 102

  • Electrical Safety Tests overview
  • Understanding test requirements
  • Standards Reference Guide overview
  • What to avoid during testing

March 8th, 2017
Time: 69 Minutes

Electrical Safety Testing 101

  • Why test?
  • Shock hazards
  • Effects of electric current on human body
  • Class I vs Class II products
  • Training Resources
  • Safe Workstation Examples

February 22nd, 2017
Time: 55 Minutes

5 Simple Ways to Setup a Safe Workstation

  • Operator Safety – Understanding the risk of electrical shock
  • Qualified Operators – knowledge required to work with the equipment
  • Stations with and without positive protection
  • Techniques for operator protection
  • Ramp up your workstation protection to guard against electrical shock

November 9th, 2016
Time: 56 Minutes

The Audit Survival Guide

What is Audited during NRTL Test Lab Audits?

  • Functionality and Calibration
  • Test Procedures
  • Test Data and Results

October 12th, 2016
Time: 56 Minutes

Automate Your Production Line: 6 ways to fully Automate Electrical Safety Testing

  • Common Electrical Safety Tests Hipot testing Ground Bond/Continuity testing And Touch Current testing
  • Testing with Multiplexers, Batch testing, Label printing, Software control and remote operation
  • Data collection and management

September 14th, 2016
Time: 65 Minutes

Leakage Testing 102

  • Brief review of the Leakage Current Test
  • General Patient Leakage Current
  • Auxiliary Patient Leakage Current
  • Mains on Applied Part Leakage Testing
  • Medical Device Leakage Testing Considerations

July 13th, 2016
Time: 64 Minutes

Leakage Testing 101

  • Testing requirements
  • What does leakage current testing measure?
  • The importance of leakage current testing
  • How is leakage current testing different from other safety tests?

June 22nd, 2016
Time: 57 Minutes

Testing Your Grounding Circuit: Bonding Vs. Continuity Testing

  • Ground of electrical products
  • Class I vs Class II products
  • Ground Continuity Test
  • Ground Bond Test
  • What is tested during each test

June 8th, 2016
Time: 45 Minutes

 Hipot Testing 102

  • AC vs DC Testing
  • Leakage current limits
  • 500VA hipot testing
  • Fault detection systems
  • Hipot tester features

May 18th, 2016
Time: 64 Minutes

 Hipot Testing 101

  • Understanding the Hipot test
  • Hipot test requirements
  • Understanding failures
  • Arc detection – What does it mean?

May 4th, 2016
Time: 75 Minutes

How Does it Work? A Look at Electrical Safety Testing

  • Review of Electrical Safety Tests
  • What is tested during each test type
  • Electrical circuits for safety tests
  • Arc Detection and SmartGFI circuits

April 13th, 2016
Time: 63 Minutes

Electrical Safety Testing 102

  • Safety tests overview
  • Understanding test requirements
  • Find the right test instruments
  • What not to do when testing

March 9th, 2016
Time: 64 Minutes

Electrical Safety Testing 101

  • General Electrical Compliance Safety
  • Why Test?
  • Personal Protective Equipment (PPE)
  • Types of Safety Testing
  • Methods for Testing Safety
  • Training Resources

February 10th, 2016
Time: 62 Minutes

Verification

  • Why verify
  • The importance of verification
  • Electrical safety test overview
  • Methods of verification
  • TVB-2 and LVB-2

November 18th, 2015
Time: 56 Minutes

Leakage Testing 102

  • Brief review of the Leakage Current Test
  • General Patient Leakage Current
  • Auxiliary Patient Leakage Current
  • Mains on Applied Part Leakage Testing
  • Medical Device Leakage Testing Considerations

October 28th, 2015
Time: 62 Minutes

Leakage Testing 101

  • Testing requirements
  • What does leakage current testing measure?
  • The importance of leakage current testing
  • How is leakage current testing different from other safety tests?

October 14th, 2015
Time: 65 Minutes

Common Methods for Testing

  • Quick overview of electrical safety tests
  • Examples/videos
  • Common issues with testing
  • AR’s recommendations for safe testing

September 15th, 2015
Time: 48 Minutes

Ground Bond and Ground Continuity

  • Ground of electrical products
  • Class I vs Class II products
  • Ground Continuity Test
  • Ground Bond Test
  • What is tested during each test

August 12th, 2015
Time: 37 Minutes

Safe Workstation

  • Operator Safety – Training
    • Understanding the risk of electrical shock
    • Qualified Persons
  • The Workstation
    • Protection against electrical shock hazards
    • Guarding of live parts
    • Approach distances
  • The Safe Methods
    • Stations with and without positive protection
    • Techniques for operator protection

July 22nd, 2015
Time: 48 Minutes